Conway Gripper Bar Complete for Bobst 1260 Die Cutter

This is Conway's upgrade to an aluminum shell to replace the standard yellow steel gripper bar. Explore product in 3D viewer!

Conway Gripper Bar Complete for Bobst SP 142 Series 006+

Gripper Bar complete for Bobst die cutters SP 142 E/ER. The axles come installed in the end fittings. Explore product in 3D viewer!

Conway Gripper Bar Complete for Bobst SP 104 E/ER/CER

Conway gripper bar complete for use in Bobst SP 104 E/ER/CER die cutters.

Conway Gripper Bar Complete for Bobst SP 126 E

Conway gripper bar complete for use in Bobst SP 126 E and SP 126 BMA die cutters.

Conway Gripper Bar Complete for Bobst SP 130 E

Conway gripper bar complete for use in Bobst SP 130 die cutters.

Conway Gripper Bar Complete for Bobst SP 102 Series 42+

Conway gripper bar complete. This gripper bar goes into Bobst die cutters SP 102 BMA, SP 102 E, SP 102 SE, SP 102 SEII and SP 102 Foilmaster. Since it is the newer version of the SP 102 gripper bars it often replaces the older SP 102 Series 1-41 (10-317-0-00-00/10-317-1-00-00) gripper bar.

Conway Gripper Bar Complete for Bobst SPO 160 Vision

Conway gripper bar complete for Bobst SPO 160 Vision die cutters.

Conway Gripper Bar Complete for Bobst SP 103 E/ER

Conway gripper bar complete for use in Bobst SP 103 E/ER die cutters.

Conway Gripper Bar Complete for Bobst SP 1600

Conway gripper bar complete for use in Bobst SP 1600 die cutters. Explore this product in 3D viewer!

Conway Gripper Bar Complete for Bobst SP 1260 E Marginless Die Cutters

Conway gripper bar complete for use in Bobst SP 1260 Marginless. (Aluminum Upgrade). Explore product in 2D!

Conway Gripper Bar Complete for Bobst 126 E (marginless)

Conway gripper bar complete for use in Bobst SP 126 E and SP 126 BMA die cutters (marginless). Manufactured by Conway Machine, Inc.

Conway Gripper Bar Complete for Bobst Novacut 106 and Speria 106

Conway gripper bar complete for use in Bobst Novacut 106/E, Speria 106/E, and Commercial 106/E die cutters.

Conway Gripper Bar Complete for Bobst 1260 Die Cutter (steel)

This steel gripper bar has been replaced by our aluminum upgrade CMI# 10-306-0-00-00

Conway Gripper Bar Complete for Bobst 1420 Die Cutter

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters.

Conway Gripper Bar Complete for Bobst SPO 1575 EEG with 5 hole pattern and Movable Grippers with Roller

The Movable Grippers have a Push Stud with a Roller installed. Explore product in 3D viewer!

Conway Gripper Bar Complete for Bobst SP 102 Series 33 and 35-41

Conway gripper bar complete for use in Bobst SP 102 E series 33 and 35-41 die cutters.

Conway Gripper Bar Complete for Bobst 1260 E Early Series Die Cutter

Conway Gripper Bar complete for use in Bobst SP 1260 E (Early Series).

Conway Gripper Bar Complete for Bobst SP 102 E Series 1-32 and 34

Conway gripper bar complete for use in Bobst SP 102 E series 1-32 and 34 die cutters.

Conway Gripper Bar Complete for Bobst SP 1080

Conway gripper bar complete for use in Bobst SP 1080 E and SP 1080 EEG.

Conway Gripper Bar Complete for Bobst SP 1120

Conway gripper bar complete for use in Bobst SP 1120 die cutters.

Conway Gripper Bar Complete for Bobst SP 102 CE/CER

Conway gripper bar complete for use in Bobst SP 102 CE/CEII/CER/CERII die cutters.

Conway Gripper Bar Complete for Bobst Expertcut 106 LER/PER & Spanthera 106 LER/PER

Conway gripper bar complete for use in Bobst Expertcut 106 LER/PER and Spanthera 106 LER/PER die cutters.

Conway Gripper Bar Complete fits Bobst SP 1420 Die Cutter (Smaller Axles)

Conway Gripper Bar complete for Bobst die cutter SP 1420 E and SP 1420 ER, Series 8-10. The axles are 8.00mm diameter as opposed to the larger 8.25mm diameter axles.

Conway Gripper Bar Complete for Bobst 142 CER II

Conway gripper bar complete for use in Bobst 142 CER II die cutters.

Conway Gripper Bar Complete for Bobst SP 142 CER

Conway gripper bar complete for use in Bobst SP 142 CER die cutters.

Conway Gripper Bar Complete for Bobst 145 PER

Conway gripper bar complete for use in Bobst 145 PER die cutters.

Conway Gripper Bar Complete with 3 hole pattern and Long End Fittings for Bobst SPO 1575

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Conway Gripper Bar Complete for Bobst SPO 1575 EEG with 5 hole pattern and Movable Gripper with Push Pad

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Conway Gripper Bar Complete for Bobst SP 1260 E Early Series

Conway gripper bar complete with a solid aluminum shell for use in Bobst SP 1260 E Early Series die cutters. Manufactured by Conway Machine, Inc.

Conway Gripper Bar Complete for Bobst SPO 1575 EEG with 3 hole pattern and Short End Fittings

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Conway Gripper Bar Complete for Bobst SP 142 E Series 1-5

Conway Gripper Bar complete for Bobst die cutter SP 142 E Series 1-5. The axles come installed in the end fittings.

Conway Gripper Bar Complete for Bobst SP 162

Conway gripper bar complete for use in Bobst SP 162 E, SP 162 ER and SP 162 CER die cutters.

Conway Gripper Bar Complete for Bobst 1650 Die Cutter

Conway's Gripper Bar complete for Bobst die cutter SP 1650 E. The Movable and Stationary grippers are the long length version on this gripper bar. The axles come installed in the end fittings.

Conway Gripper Bar Complete for Bobst SPO 2000 EEG

Conway gripper bar complete for use in Bobst SPO 2000 die cutters.

Conway Gripper Bar Complete for Bobst SP 900

Conway Gripper Bar complete for Bobst die cutters SP 900 E and SP 900 ER. The axles come installed in the end fittings. There is another version available for running corrugated board. Ask your salesperson about 10-351-1-00-00.

Conway Gripper Bar Less End Fittings for Bobst SPO 2000 EEG

Conway Gripper Bar Less End Fittings for Bobst die cutter SPO 2000 E.

Conway Gripper Bar for Bobst SPO 1575 EEG Less End Fittings with 5 hole pattern and Movable Gripper with Push Pad

he Movable Grippers have a Push Stud with a Nylon (plastic) pad installed. The Shell has a five bolt-hole pattern (as compared to the three bolt-hole pattern).

Conway Old Style Gripper Bar Complete for Bobst SPO 1600

Conway Gripper Bar complete for Bobst die cutter SPO 1600 , Old Style. The axles come installed in the end fittings.

Conway Gripper Bar Less Movable Grippers fits Bobst 1650

Conway Gripper Bar less Movable Grippers for Bobst die cutter SP 1650 E. The Stationary grippers are the long length version on this gripper bar. The axles come installed in the end fittings.

Conway Gripper Bar Less End Fittings for Bobst SP 142 Series 006+

Conway Gripper Bar Less End Fittings for Bobst die cutters SP 142 E and SP 142 ER.

Conway Gripper Bar Less End Fittings for Bobst SP 1600

Conway Gripper Bar Less End Fittings for Bobst die cutter SP 1600 E and SP 1600 ER. Manufactured by Conway Machine, Inc.

Conway Gripper Bar Complete w/ Short Version Grippers for Bobst 1650 Die Cutter

Conway Gripper Bar complete for Bobst die cutter SP 1650 E. The Movable and Stationary grippers are the short length version on this gripper bar. The axles come installed in the end fittings.

Conway Gripper Bar Complete for Bobst Mastercut 2.1

Conway gripper bar complete for use in Bobst Mastercut 2.1 die cutters.

Conway Gripper Bar Complete for Bobst Visioncut 1.6 and SPO 160 Vision

Conway gripper bar complete for use in Bobst Visioncut 1.6/1.6 PR/SPO 160 Vision die cutters with serrated grippers.

Conway Gripper Bar Complete for Bobst Mastercut 1.7

Conway gripper bar complete for use in Bobst Mastercut 1.7 die cutters.

Conway Gripper Bar Complete for Expertcut 1.6

Conway gripper bar complete for use in Bobst Expertcut 1.6 die cutters.

Conway Old Style Gripper Bar Less End Fittings for Bobst SPO 1600 EEG

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Conway Gripper Bar with 5 hole pattern Less End Fittings and Movable Grippers with Roller for Bobst SPO 1575 EEG

Conway Gripper Bar Less End Fittings for Bobst die cutter SPO 1575 EEG. The Movable Grippers have a Push Stud with a Roller installed. The Shell has a a five bolt-hole pattern (as compared to the three bolt-hole pattern).

Conway Gripper Bar Complete w/ Corrugated Grippers for Bobst 1650 Die Cutter

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Conway Sprocket O.S. for Bobst 126 and 1260 Die Cutters

Conway sprocket O.S. for use in Bobst SP 126 E, SP 126 BMA, SP 1260 E, SP 1260 EE and SP 1260 EEG die cutters.

Conway Chain Guide Rail Set for Bobst SP 1260

Conway Chain Guide Rail Set that includes all sections from Feed to Delivery system. This set fits Bobst die cutters SP 1260 E, SP 1260 EE, SP 1260 EEG both standard and marginless. See the Related Products section for a complete list of Models. Manufactured by Conway Machine, Inc.

Conway Disc Guide Delivery End for Bobst SP 1260

Conway Disc Guide Delivery End that fits Bobst die cutters SP 1260 E, SP 1260 EE, SP 1260 EEG both standard and marginless. See the Related Products section for a complete list of Models.

Stationary Gripper for Bobst SP 102 Series 1-32 and 34 Stationary Gripper

Conway Stationary Gripper that goes into gripper bars for Bobst die cutters SP 102 E for Series 1 - 32 and 34.

Conway Lever for Bobst Die Cutter

Conway Lever

Conway Movable Gripper Assembly for Bobst SP 102 Series 1-32 and 34

Conway Movable Gripper Assembly

Conway Lever O.S. for Bobst SP 142 Series 1-5

Conway Lever Operator Side

Feed Roller Conversion Kit

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Conway Movable Gripper Assembly for Bobst SPO 1600 EEG

Conway Movable Gripper Assembly

Conway Upper Stripping Pin 2mm

2mm Strip Pin used with the Pin Holder of the Upper Strip Pin Assembly for Bobst die cutters.

Conway Upper Stripping Pin 3mm

3mm Strip Pin used with the Pin Holder of the Upper Strip Pin Assembly for Bobst die cutters.

Conway Upper Stripping Pin 4mm

4mm Strip Pin used with the Pin Holder of the Upper Strip Pin Assembly for Bobst die cutters.

Conway Upper Stripping Pin 5mm

5mm Strip Pin used with the Pin Holder of the Upper Strip Pin Assembly for Bobst die cutters. We can customize the pin size with a minimum order of 100 pins.

Conway Upper Stripping Pin 10mm

10mm Strip Pin used with the Pin Holder of the Upper Strip Pin Assembly for Bobst die cutters.

Mounting Bushing (Inside) for Bobst

Lower Strip Pin 31mm

A 4mm x 31mm strip pin for use in the lower strip pin assembly for Bobst die cutters.

Aluminum Bushing

Aluminum bushing used in the Lower Strip Pin Assembly for Bobst die cutters. Request a Quote!

Conway Upper Stripping Pin 14mm

14mm Strip Pin used with the Pin Holder of the Upper Strip Pin Assembly for Bobst die cutters. We can customize the pin size with a minimum order of 100 pins.

Conway Upper Stripping Pin 15mm

15mm Strip Pin used with the Pin Holder of the Upper Strip Pin Assembly for Bobst die cutters.

Belt for Feed Roller

Belt for Feed Roller Conversion Kit.

Washer for Bobst 102 1260

Conway Machine Washer that goes into Bobst die cutters SP 102 E, SP 102 BMA, SP 102 SE, SP 102 SEII and SP 102 Foilmaster for Series 1 - 42+; SP 102 CER and SP 1260 E gripper bars.

Tooling Bar End Clamp Spacer

Tooling Bar End Clamp Spacer

Bushing 10-12

Conway 10-12 Bushing. Compare to: BSA1111023500, BSA1111030100.

Stepped Flanged Bushing for Bobst

Stationary Gripper for Bobst 145 PER

Stationary Gripper for Bobst 106

Shim for Bobst 106

Shell for Bobst 106

Magnesium Shell for Bobst 106

Shaft Assy for Bobst 106

Movable Gripper Assy for Bobst 106

Mounting Block 10-376-0-07-00

End Fitting O.S. Assy. for Bobst 106

End Fitting O.O.S. Assy. for Bobst 106

Cross Pin for Bobst 106

Axle for Bobst 106

Movable Gripper 10-323-0-15-02

Push Pad 10-323-1-15-04

Push Stud 10-323-1-15-03

Back Stop (Optional)

Conway Down Stop for Bobst SPO 1575 EEG

Cownay Down Stop

Pilot Button for Bobst 1600

Movable Gripper 10-310-0-15-02

Bushing 12-20

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Stop Block for Bobst 1600

Conway Stop Block

Spring Retainer

Conway Spring Retainer

Bushing 10-20

Conway Machine Inc. Manufactured Product to be used in Bobst Die Cutters.

Bushing 12-10

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Bushing 12-12

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Bushing 12-15

Conway Machine Inc. Manufactured Products to be used in Bobst Die Cutters

Bushing 14-15 for Bobst 102 Die Cutter

Conway End Fitting 14-15 Bushing that goes into Conway gripper bars for use in Bobst die cutters SP 102 CE, SP 102 CER and SP 102 CER II gripper bars. Manufactured by Conway Machine.

Shaft for Bobst 1600

Conway's Shaft that goes into gripper bars for Bobst die cutter SP 1600 E and SP 1600 ER. Explore product in 3D viewer!

Stop Block for Bobst SP 1600

Conway's Shaft Support Bearing that goes into gripper bars for Bobst die cutter SP 1600 E and SP 1600 ER. Manufactured by Conway Machine, Inc.

Shell

Conway's Shell that goes into gripper bars for Bobst die cutter SP 1600 E and SP 1600 ER. Manufactured by Conway Machine, Inc.

Conway End Fitting O.O.S. for Bobst SPO 160 Vision

Conway end fitting O.O.S. for use in Bobst SPO 160 Vision die cutters.

Conway Axle 10-319-0-14-00

Conway Axle that goes into gripper bars for Bobst die cutters SP 103 E and SP 103 ER; SP 104 E, SP 104 ER and SP 104 CER; SP 130 E, SP 130 ER, SP 130 CER Series 002+; SP 142 E (including Series 1-5), SP 142 ER, SP 142 CER, SP 142 CER II and SP 142 Matic CER; SP 162 E, SP 162 ER and SP 162 CER; SP 160 S and SPO 1600 EEG.

Washer for Bobst 102 1650

Conway Washer that goes into gripper bars for Bobst die cutters SP 102 CE, SP 102 CER and SP 102 CER II gripper bars; SP 1650 E.

Conway Gripper Bar Complete for Bobst SPO 160 S

Conway gripper bar complete for use in Bobst SPO 160 S die cutters.

Conway Shell for Bobst SPO 160 S

Conway shell for use in Bobst SPO 160 S die cutters.

Conway Gripper Bar Complete for Bobst SPO 160 Vision (option)

Conway gripper bar complete for use in Bobst SPO 160 Vision.

Bushing, Bottom Stripping Pin (Plastic)

Pin, Bottom Stripping (4mm x 61mm)

Spring, Bottom Stripping Pin

Screw, Special Bottom Stripping Pin

Conway Spring for Bobst SP 102 Series 1-42+ Spring

Conway Spring for the Movable Gripper Assembly

Conway Shell for Bobst SP 102 E

Conway shell for use in Bobst SP 102 E die cutters.

Conway Shaft for Bobst SP 102 Series 1-42+

Conway Shaft

Conway End Fitting O.O.S. for Bobst SP 102 Series 1-42+

Conway End Fitting Opposite Operator Side

Conway End Fitting O.S. for Bobst SP 102 Series 1-42+

Conway End Fitting Operator Side

Shell (Profile)

Conway Machine-manufactured Shell (also called a profile) that goes into gripper bars for Bobst die cutters SP 102 CE, SP 102 CER and SP 102 CER II.

End Fitting O.S. for Bobst 102 CE/CER/II Die Cutter

Conway End Fitting Operator Side

End Fitting O.O.S. 10-332-0-03-00

Conway End Fitting Opposite Operator Side

Movable Gripper Assembly 10-332-0-15-01

Conway Machine-manufactured Movable Gripper Assembly (includes the Pilot Buttons) that goes into gripper bars for Bobst die cutters SP 102 CE, SP 102 CER and SP 102 CER II. This is the top gripper.

Conway Gripper Bar Complete for Bobst Expertcut 106 LE/PE

Conway gripper bar complete for use in Bobst Expertcut 106 LE/PE, Spanthera 106 LE, and Visioncut 106 L/LE die cutters.

Conway Gripper Bar Complete for Bobst Expertcut 106 LER/PER, Spanthera 106 LER/PER, and Sprintera 106 LER

Conway gripper bar complete for use in Bobst Expertcut 106 LER/PER, Spanthera 106 LER/PER, and Sprintera 106 LER die cutters.

O.O.S. End Fitting Assembly for Bobst 106 LER/PER 3.0

Spring for Bobst 106

Spring for Bobst 106 LER

Conway Mounting Pin

Conway Mounting Pin

Conway Shell

Conway Shell

Conway Spring for Bobst Type 1

Conway Spring that goes into gripper bars for Bobst die cutters SP 103 E and SP 103 ER; SP 104 E, SP 104 ER and SP 104 CER; SP 142 CER, SP 142 CER II and SP 142 Matic CER; and SP 162 E, SP 162 ER and SP 162 CER. 

Conway End Fitting O.S.

Conway End Fitting Operator Side

Conway End Fitting O.O.S.

Conway End Fitting Opposite Operator Side

Conway End Fitting Holder O.S.

Conway End Fitting Holder Operator Side

Conway Stationary Gripper 10-326-0-16-00

Conway Stationary Gripper

Conway Lever O.O.S. for Bobst SP 104

Conway Lever Opposite Operator Side

Conway Spring for Bobst Type 2

Conway Spring that goes into gripper bars for Bobst die cutters SP 103 E and SP 103 ER; and SP 104 E, SP 104 ER and SP 104 CER.

Conway Shaft

Conway Shaft

Conway Movable Gripper Assembly

Conway Movable Gripper Assembly

Conway Lever O.S. for Bobst SP 104

Conway Lever Operator Side

Conway Gripper Bar Complete for Bobst Mastercut 106 PER & Sprintera 106 PER

Conway gripper bar complete for use in Bobst Mastercut 106 PER and Sprintera 106 PER die cutters.

Conway Shaft Spacer

Conway Shaft Spacer that goes into gripper bars for the Bobst die cutters SP 126 E and SP 126 BMA; SP 1260 E.

Conway Marginless Shaft Bobst SP 126

Conway Marginless Shaft

Conway Marginless Lever for Bobst SP 126

Conway Marginless Lever

Conway Marginless Shaft Support Bearing for Bobst SP 126

Conway Marginless Shaft Support Bearing

Conway Marginless Down Stop for Bobst SP 126

Conway Marginless Steel Down Stop

Conway Marginless Movable Gripper Assembly for Bobst SP 126

Conway Marginless Movable Gripper Assembly

Conway Marginless End Fitting O.O.S. for Bobst SP 126

Conway Marginless End Fitting Opposite Operator Side

Conway Marginless End Fitting O.S. for Bobst SP 126

Conway Marginless End Fitting Operator Side

Conway Marginless Shell for Bobst SP 126 E

Conway Marginless Shell

Down Stop (Delrin)

Conway Lever for Bobst 126/1260

Conway Lever that goes into gripper bars for Bobst die cutters SP 126 E and SP 126 BMA; SP 1260 E (newer models). This Lever has been modifed to allow for adjustments.

Conway Tightening Plate

Conway Tightening Plate that goes into gripper bars for the Bobst die cutters SP 102 Series 42+ Models SP 102 E and SP 102 BMA; SP 126 E (10-331-0-00-00/10-331-1-00-00); SP 1260 E Plus Aluminum (10-306-0-00-00) gripper bars.

Conway Shaft Support Bearing for Bobst 126/1260

Conway Shaft Support Bearing

Conway Shaft Support Bushing for Bobst 126/1260

Conway Shaft Support Bushing

Conway Down Stop Steel for Bobst SP 126

Conway Steel Down Stop that goes into gripper bars for Bobst die cutters SP 126 E and SP 126 BMA; SP 1260 E (newer models). Manufactured by Conway Machine, Inc.

Conway Lifter for Bobst 126/1260

Conway Lifter that goes into gripper bars for Bobst die cutters SP 126 E and SP 126 BMA; SP 1260 E (newer models).

Conway Stationary Gripper

Conway Stationary Gripper that goes into gripper bars for Bobst die cutters SP 126 E and SP 126 BMA; SP 1260 E.

Conway End Fitting O.O.S. for Bobst 126/1260

Conway End Fitting Opposite Operator Side

Conway End Fitting O.S. for Bobst 126/1260

Conway End Fitting Operator Side that goes into gripper bars for Bobst die cutters SP 126 E and SP 126 BMA; SP 1260 E (newer models).

Conway Shell for Bobst 126/1260

Conway Shell that goes into gripper bars for Bobst die cutters SP 126 E and SP 126 BMA; SP 1260 E (newer models).

Conway Movable Gripper

Conway Movable Gripper that goes into gripper bars for Bobst die cutters SP 126 E and SP 126 BMA; SP 1260 E.

Conway Shaft for Bobst SP 130 Series 002+

Conway Shaft

Conway Mounting Pin for Bobst SP 130 Series 002+

Conway Mounting Pin

Conway Shaft Support Bearing O.O.S. for Bobst SP 130 Serier 002+

Conway Shaft Support Bearing Opposite Operator Side

Conway Shaft Support Bearing O.S. for Bobst SP 130

Cownay Shaft Support Bearing Operator Side

Conway End Fitting Holder O.O.S. for Bobst SP 130 Series 002+

Conway End Fitting Holder Opposite Operator Side

Conway End Fitting Holder O.S. for Bobst SP 130 Series 002+

Bobst SP 130 Series 002+ End Fitting Holder Operator Side

Conway End Fitting O.O.S. for Bobst SP 130 Series 002+

Conway End Fitting Opposite Operator Side

Conway End Fitting O.S. for Bobst SP 130 Series 002+

Conway End Fitting Operator Side

Conway Shell for Bobst SP 130 Series 002+

Conway Shell

Conway Gripper Bar Complete for Bobst Expertcut 106 PER 3.0 and Eterna Ecut 1060 Elite

Conway gripper bar complete for use in Bobst Expertcut 106 PER 3.0 and Eterna Ecut 1060 Elite die cutters.

Bushing 10-15

Conway 10-15 Bushing commonly used in Bobst die cutter models; SP 1260 E standard and marginless versions ; SP 102 BMA, SP 102 E, SP 102 SE, SP 102 SEII and SP 102 Foilmaster for Series 1 - 42+; SP 126 BMA, SP 126 E and SP 126 Marginless; SP 130 E, SP 130 ER and SP 130 CER; SP 142 E, SP 142 ER and SP 142 CER and SP 162 CER. See the Related Products listing for details of models served by this bushing. Manufactured by Conway Machine.

Tightening Plate for Bobst Die Cutter

Conway's Tightening Plate that goes into gripper bars for the Bobst die cutters SP 142 E Series 1-5; SP 1600 E and SP 1600 ER.

Conway Shaft Support Bushing for Bobst SP 142 Series 006+

Conway Shaft Support Bushing

Conway Shell for Bobst SP 142 Series 006+

Conway Shell that goes into gripper bars for the Bobst die cutters SP 142 E and SP 142 ER.

Conway End Fitting O.S. for Bobst SP 142 Series 1-5

Conway Series 1-5 End Fitting Operator Side

Conway End Fitting O.S. for Bobst SP 142 Series 006+

Conway End Fitting Operator Side

Conway End Fitting O.O.S. for Bobst SP 142 Series 006+

Conway End Fitting Opposite Operator Side

Conway Stationary Gripper for Bobst SP 142 Series 006+

Conway Stationary Gripper that goes into gripper bars for the Bobst die cutters SP 142 E and SP 142 ER.

Conway Movable Gripper for Bobst SP 142 Series 006+

Conway Movable Gripper

Conway Roller for Bobst SP 142 Series 006+

Conway Roller

Conway Shaft Support Bearing for Bobst SP 142 Series 006+

Conway Shaft Support Bearing

Conway Shell for Bobst SPO 160 Vision (option)

Conway shell for use in Bobst SPO 160 Vision die cutters.

Movable Gripper by Conway Machine fits Bobst 1260 Die Cutters

Conway Machine's Movable Gripper that goes into the gripper bars for Bobst die cutter SP 1260 E. Manufactured by Conway Machine, Inc.

Axle by Conway Machine fits Bobst Die Cutters

Conway Machine Axle

Spring for Movable Gripper by Conway Machine

Conway Spring

Down Stop by Conway fits Bobst 1260 die cutter

Conway Down Stop that goes into the Conway Machine Plus Aluminum gripper bars for Bobst die cutter SP 1260 E.

Shaft Support Bearing by Conway fits Bobst 1260 Die Cutter

Conway Lever that goes into the Conway Machine Plus Aluminum gripper bars for Bobst die cutter SP 1260 E. Manufactured by Conway Machine, Inc.

Lever by Conway fits Bobst 1260 Die Cutter

Conway Lever that goes into the Conway Machine Plus Aluminum gripper bars for Bobst die cutter SP 1260 E. This Lever is updated to be adjustable which makes your job easier. It fits on steel and aluminum gripper bars. Manufactured by Conway Machine, Inc.

Conway Flanged Roller Delivery End for Bobst SP 1260

Conway Flanged Roller that is affixed in the Delivery section of the die cutter. It fits Bobst die cutters SP 1260 E, SP 1260 EE, SP 1260 EEG both standard and marginless. See the Related Products section for a complete list of Models.

Conway Pull Roller Assembly for Bobst SP 1260

Conway Pull Roller Assembly that is affixed in the Feed section of the die cutter. This assembly consists of the Pull Roller and Insert. It fits Bobst die cutters SP 1260 E, SP 1260 EE, SP 1260 EEG both standard and marginless. See the Related Products section for a complete list of Models.

Lifter by Conway fits Bobst 1260 Die Cutter

Conway Machine Lifter

End Fitting O.S. by Conway fits Bobst SP 1260 Marginless Die Cutter

Conway End Fitting Operator Side

Aluminum Shell by Conway fits Bobst 1260 Marginless Die Cutter

Conway's Aluminum Shell (aka Profile)  that goes into the gripper bars for Bobst die cutter SP 1260 E Marginless. This Aluminum Shell goes into our upgraded Marginless Plus Aluminum gripper bar (10-305-0-00-00) that is the replacement for the steel yellow gripper bar.

End Fitting O.S. by Conway fits Bobst 1260 Die Cutter

Conway 306 End Fitting Operator Side

End Fitting O.O.S. by Conway fits Bobst 1260 Die Cutter

Conway End Fitting Opposite Operator Side

Jaw Lifter by Conway fits Bobst 1260 Die Cutter

Conway Jaw Lifter

Shaft Support Bushing by Conway fits Bobst 1260 Die Cutter

Conway Shaft Support Bushing that goes into the Conway Machine Plus Aluminum gripper bars for Bobst die cutter SP 1260 E. Manufactured by Conway Machine, Inc.

End Fitting O.S., 8.00 mm

Conway End Fitting Operator Side

Shell 10-316-0-01-02

Axle, 8.00 mm

Conway Axle that goes into gripper bars for Bobst die cutters SP 1420 E and SP 1420 ER, Series 8-10. This axle has a diameter of 8.00mm. The larger axle, 8.25mm, for the SP 1420 can be found in the Related Products section. Manufactured by Conway Machine, Inc.

Long Shaft Spacer

Conway Long Shaft Spacer

Medium Shaft Spacer

Conway Medium Shaft Spacer

Short Shaft Spacer

Conway Short Shaft Spacer

Shaft 10-316-0-27-00

Conway Shaft that goes into gripper bars for Bobst die cutter SP 1420 E and SP 1420 ER, Series 1-11.

Lever for Bobst SP 1420

Conway Lever that goes into grippe bars for Bobst die cutter SP 1420 E and SP 1420 ER, Series 1-11.

Lifter Assembly

Conway Lifter Assembly

Movable Gripper for SP 1420

Conway Movable Gripper

Stationary Gripper 10-316-0-16-00

Conway Stationary Gripper

End Fitting O.O.S., 8.25 mm

Conway End Fitting Opposite Operator Side

End Fitting O.S., 8.25 mm

Conway End Fitting Operator Side

Shell Assembly 10-316-0-01-01

Conway Shell Assembly

Axle, 8.25mm

Conway's Axle for Bobst die cutters SP 1420 E and SP 1420 ER, Series 1-11 and SP 1600 E and SP 1600 ER. This axle has a diameter of 8.25 mm. The smaller axle, 8.00 mm, for the SP 1420 can be found in the Related Products section.

Conway Old Style Down Stop O.O.S. for Bobst SPO 1600 EEG

Conway Down Stop Opposite Operator Side

Conway Old Style Down Stop O.S. for Bobst SPO 1600 EEG

Conway Down Stop Operator Side

Conway Old Style Support Gripper for Bobst SPO 1600 EEG

Conway Support Gripper

Conway Old Style Stationary Gripper for Bobst SPO 1600 EEG

Conway Stationary Gripper

Conway Old Style End Fitting Holder O.O.S. for Bobst SPO 1600 EEG

Conway End Fitting Holder Opposite Operator Side

Conway Old Style End Fitting Holder O.S. for Bobst SPO 1600 EEG

Conway End Fitting Holder Operator Side

Conway Old Style End Fitting O.O.S. for Bobst SPO 1600 EEG

Conway End Fitting Opposite Operator Side

Conway Old Style End Fitting O.S. for Bobst SPO 1600 EEG

Conway End Fitting Operator Side

Conway Old Style Shell for Bobst SPO 1600 EEG

Conway Gripper Bar Shell

Lever O.O.S.

Conway's Lever Opposite Operator Side that goes into gripper bars for Bobst die cutter SP 1600 E and SP 1600 ER. Manufactured by Conway Machine, Inc.

Lever O.S.

Conway's Lever Operator Side that goes into gripper bars for Bobst die cutter SP 1600 E and SP 1600 ER. Manufactured by Conway Machine, Inc.

Lifter

Conway's Lifter that goes into gripper bars for the Bobst die cutters SP 142 E Series 1-5; SP 1600 E and SP 1600 ER.

Spring

Conway's Spring that goes into gripper bars for the Bobst die cutters SP 142 E Series 1-5; SP 1600 E and SP 1600 ER.

Shaft Support Bushing

Conway's Shaft Support Bushing that goes into gripper bars for the Bobst die cutters SP 142 E Series 1-5; SP 1600 E and SP 1600 ER.

Tightening Plate

Conway Tightening Plate

Stationary Gripper

Conway's Stationary Gripper that goes into gripper bars for the Bobst die cutters SP 142 E Series 1-5; SP 1600 E and SP 1600 ER.

End Fitting O.O.S.

Conway End Fitting Opposite Operator Side

End Fitting O.S.

Conway's End Fitting Operator Side that goes into gripper bars for Bobst die cutter SP 1600 E and SP 1600 ER.

Movable Gripper Assembly for SP 1600

Conway Movable Gripper Assembly

Push Pad 10-341-0-15-05

Push Stud 10-341-0-15-04

Conway Movable Gripper Assembly with Roller for Bobst SPO 1575 EEG

Conway Movable Grippers

Conway Shell for Bobst SPO 1575 EEG with 5 hole pattern

Conway Shell for gripper bars that go into Bobst die cutter SPO 1575 EEG. This Shell has a five bolt-hole pattern.